HENGVO / LANGUAGES

Choose your language

EnglishEN简体中文中文РусскийRUEspañolESDeutschDEFrançaisFRPortuguêsPTالعربيةAR
HENGVO / Search

HENGVO

HENGVO / Technical library

Knowledge that
helps you specify.

Material, construction, measurements and sample evaluation. A technical reference library for making the next conversation more precise.

01

Material guide

Material selection starts with the process medium and operating conditions. Review the polymer alongside the yarn, weave, finishing and cleaning regime.

PP

Polypropylene

For evaluation in solid–liquid separation, sludge and chemical processes.

Confirm medium and concentration, operating temperature, cake release and cleaning conditions.

PES

Polyester

Woven and needle-felt structures for a range of process filtration requirements.

Review dimensional stability, wet-heat conditions and the chemistry and frequency of cleaning.

PA

Polyamide / Nylon

Monofilament fabrics and meshes for applications with mechanical and structural requirements.

Review abrasion, moisture-related dimensional changes and compatibility with the process medium.

02

Construction guide

A fabric and a finished filter are different specification levels. Define the base medium, then the openings, seams, reinforcement and sealing geometry.

Construction schematic. Not to scale; confirm the selected design against a drawing or sample.

Filter press cloth
03

Measurement guide

Record every value with its unit and test method. For permeability, include the pressure differential and test area; for dimensions, include tolerances and drawing revision.

CheckRecordWhy it matters
Dimensions & constructionWeight, thickness, width, finished size and agreed tolerances.A comparable specification and a correct equipment fit.
Mechanical propertiesWarp/weft tensile strength and elongation; test method and units.Assessment against installation and mechanical loads.
Permeability & filtrationAir-permeability test pressure, area and units; process-trial results.Comparable data. Air permeability alone is not a micron rating.
Fabrication & appearanceHole positions, seams, reinforcement, rings and surface condition.Installation compatibility and consistent finishing.
04

Sample evaluation

Agree the trial before ordering the batch. Record the sample identity and evaluate installation, filtrate, throughput or cycle, discharge and cleaning.

01

Can I replace a cloth using only its weight?

+

No. Two fabrics with the same weight can have different yarns, weaves, finishes and permeability. Compare the existing sample, full specification and operating conditions.

02

Does air permeability equal filtration accuracy?

+

No. It describes airflow under stated test conditions. Particle retention depends on the medium, the fluid and the filtration process. A process trial is needed to evaluate suitability.

03

What should a sample trial confirm?

+

Check installation, sealing, filtrate quality, throughput or cycle time, cake release and cleaning. Agree the evaluation criteria before moving to a production order.

04

Can a certificate cover every product?

+

Only its stated scope applies. Check the holder, product or sample, method, date and validity. Ask for the specific document your application requires.

05

Order documents

Keep the material specification, approved drawing, sample reference and inspection plan linked to the same order. Confirm document scope and validity for the intended use.

01

Specification & drawing

Record material, construction, finish, dimensions, tolerances and drawing revision.

02

Sample & trial record

Identify the sample and record the agreed evaluation: fit, filtrate quality, cycle time and cake release.

03

Inspection & shipment record

Agree inspection results, batch or order identification, quantity, labels and packing details.

06

Downloads

Download a project checklist or a product-specific enquiry sheet. Fill in the available information and discuss the remaining points with Colin.

A working document for specification review and sample evaluation. Complete the applicable fields before requesting a quotation.

TXT ↓

03 — THE WEAVE LAB

Small details.
A different structure.

Explore the rhythm of warp and weft. Change the weave to see how threads interlace.

Weft →Warp →

Balanced interlacing

Weave illustrations are schematic, not a specification for a particular model.

PP / PES / PA

Choose the material.

Performance depends on the specific fabric and operating conditions. Confirm the technical data and test method for the selected product.

PP

Polypropylene

For evaluation in solid–liquid separation, sludge and chemical processes.

Confirm medium and concentration, operating temperature, cake release and cleaning conditions.

PES

Polyester

Woven and needle-felt structures for a range of process filtration requirements.

Review dimensional stability, wet-heat conditions and the chemistry and frequency of cleaning.

PA

Polyamide / Nylon

Monofilament fabrics and meshes for applications with mechanical and structural requirements.

Review abrasion, moisture-related dimensional changes and compatibility with the process medium.

START A CONVERSATION

HENGVO / CHINA

Discuss your
filtration requirements.

Share the equipment drawing, process conditions and performance target. Include the current sample or specification when replacing a filter medium.

Email technical requirements
01 / Contact us

Colin↗

[email protected]WhatsApp+86 159 2401 1286